Pro-Lite Spinal Immobilization Equipment

• Seamless design prevents fluids from entering and cross contaminating
• Unlimited single-patient weight capacity
• Weight 11.5 lbs
• 72" long, 16" wide, only 2-1/4" thick
• Tapers from 16"to 14" at foot end
• Contour grip offers rescuer comfort on all 16 of the 2" x 5-1/4" holds
• Offers better patient centering and requires much less padding
• With the unique design, two boards can be stored together in less than 4" of space
• Foot section is angled slightly downward to assist rescuer in auto extrication
• Only board that provides natural curvature of the lower extremities
• Spinal injury can be diagnosed before the patient is removed from the spineboard
• Compatible to all head immobilization devices
• Color options: White, orange, neon-yellow, neon-green, and tactical black.

• Seamless design prevents fluids from entering and contaminating
• 72" long, 16" wide, only 2-1/4" thick
• Weight 14 lbs
• Weight capacity is unlimited
• 100% x-ray translucent between hand holds
• UV stable
• Compatible to all head immobilization devices
• Contour grip offers rescuer comfort on all 16 of the 2" x 5-1/4" holds
• Concave design offers better patient centering & requires much less padding
• Only board that provides natural curvature of the lower extremities
  
• Color options: Day glow orange, neon-yellow, neon-green, blue, red, white and tactical black.

• 500 lb patient weight capacity
• Seamless design prevents fluids from entering and eliminates cross-contamination
• Two boards can be nested together in less than 4" of space with the head immobilizer attached
• Flotation capabilities of 300 lbs.
• Weight: 15 lbs.
• 72" X 16" X 2-1/4"
• 100% x-ray translucent between hand holds
• Available with or without speed clips
• 100% guarantee of workmanship under normal usage, guaranteed for life
• Guaranteed 100% x-ray translucent between hand holes
• Available custom 2" graphic black letters, guaranteed for the life of the board
• Custom logos and graphics are available and guaranteed for the life of board
• Reflective strips on edge of the board are optional
• Custom colors available
• Delivery of in stock colors: one week

"Rapid Take Down" is intended to be reserved for the multi-system trauma patient with low blood pressure. You do it anyway because the short spine devices most widely available were designed decades ago, in the day of bench seats and big cars. They just do not work well in today's bucket seats. They are nearly impossible to clean, disinfect and just take too long to apply. Why place your patient at risk of permanent disability when now you can do the job right without compromise?

• Closed cell foam construction of the pillows and straps provides excellent support and comfort to patient. Plastic coating is waterproof and cleans and disinfects easily.
• The Base Plate is made of a High Density Molded Plastic that is impervious to all fluids. Simply Snap the Base Plate at the top of the PRO-LITE™ Backboard by aligning the three nodes with the corresponding holes on the Backboard; place the palm of your hand on the Base Plate Velcro and squeeze the side nodes through the holes on the Backboard until they snap in place. Finally, insert the top node into the hole.
• The Head Immobilizer may be stored while attached to the backboard. If removing the Head Immobilizer from the backboard, pop the sides out first. Do not pull back on the top to remove.
• The Head Immobilizer pillows have large ear holes to aid in monitoring the patient's blood loss or fluid drainage. No metal parts are used in any of the components.
• The unique snap on - snap off feature prevents loss or movement during street or aquatic procedures. All components are buoyant, making it ideal for water rescue.
• Weighs less than 2 pounds.